KLINGERsil Non-Asbestos Gasketing and Cut Gaskets by Thermoseal

Thermoseal  manufactures a complete line of non-asbestos gasketing including wire inserted compressed sheet and Flexible Graphite sheet. Kraft Industrial can supply these materials either in full sheet, partial sheet, or fabricated parts.

KLINGERsil C-4401 

High quality Non-Asbestos material composed of fibers with high chemical stability and heat resistance bonded with Nitrile rubber. Outstanding creep resistance at high temperatures and high loads provides maximum safety and high torque retention. Superior service in Wet Steam. Good anti-stick properties. 750°F, 1500 psi  Green

KLINGERsil C-4430

High quality Non-Asbestos material composed of fiberglass, Aramid and Inorganic fibers for heat resistance bonded with Nitrile rubber. Excellent chemical resistance, good creep resistance, general purpose sheet. 750°F., 1500 psi. Green/White

KLINGERsil C-4408 (Wire Inserted)

High quality Non-Asbestos Wire Inserted material composed of synthetic fibers reinforced with low carbon steel woven mesh and bonded with Nitrile rubber. Best available gasketing material for fluctuating temperatures and pressures. Steel reinforcement provides best service in high temperature and stress applications, especially exhaust ducts and stacks.

KLINGER Flexible Graphite

Flexible Graphite gasketing exhibits a high resistance to most agents including inorganic and organic acids and bases, solvents, hot wax and oils. Flexible Graphite features include load bearing not affected by temperatures to 1000°F., virtually no cold flow, low gas permeability, low electrical resistivity, non-abrasive, low thermal expansion characteristics, unlimited shelf-life. Stocked in SLS Stainless Steel reinfoirced  form.

Key Benefits

• Temperatures to 1000°F
• Excellent Steam Gasket
• Wire Inserted for extreme applications

Sizing:

Non-Asbestos sheeting          60" x 60"           1/64", 1/32", 1/16", 1/8"

Flexible Graphite                   1 M x 1 M          1/32" , 1/16" , 1/8"