Degreasers, Cleaner/Primers, Metal
Pro Strength Degreaser
Quickly dissolves and removes grease, oil and dirt from: iron, steel,
aluminum, magnesium, copper, rubber, plastic and concrete. Rinses off with water.15 oz. aerosol.
Electrical Contact & Parts Cleaner
Fast evaporating cleaner removes grease, oil and other contaminants
from electrical parts and mechanical equipment. Contains no CFCs or HCFCs and is safe on most plastics. Non-Conductive, non-corrosive.11 oz. aerosol.
Non-Flammable Electrical Contact Cleaner
Removes grease, oil and other contaminants from electrical parts to prevent contact failure. Dries residue free in seconds. Non-Conductive, non-corrosive, non-flammable. Contains no CFCs or Class 1 ODCs. Contains HCFC-141 b. May attack some sensitive plastics. 15 oz. aerosol.
Technical Data Sheet - Non-Flammable Electric Contact Cleaner
Chisel® Gasket Remover
Removes gaskets from any type of assembly in 10 to 15 minutes. Prepares metal parts for new gaskets, eliminating scraping and sanding. Works on wood; non-corrosive on aluminum. Not for use on plastics, linoleum or synthetic fibers.
Penetrating Oil
Penetrates, lubricates and displaces moisture. Protects aginst rust and corrosion. Contains no ODCs.
Solvo-Rust® Super Penetrating Oil
Frees rusted parts and keeps them lubricated and protected from rust after use. May be applied on or near moving parts. Will not harm painted surfaces. Contains no ODCs.
Maxi-Coat
Heavy duty coating provides long-term protection for metal parts, equipment and machinery. Forms a protective, waxy film which seals out moisture, air, acid and other corrosive elements. Great for protecting parts in storage. Removable.
Cold Galvanizing Compound
Sprays on metal surfaces to prevent corrosion even when surface is scratched. Ideal touch-up for welded seams. Highly resistant to salt corrosion and water. Not resistant to acids or alkaline solutions. Contains no ozone-depleting compounds.
Extend® Rust Treatment
One-step rust treatment goes on white and converts rust to a durable, black, metal-protective coating in 10 minutes. Wirebrush parts and apply with brush or spray. Surface rust must be present. Use as a primer or finish coat. Resists temperatures to 250°F intermittent, 200°F continuous.
Other Cleaning/Degreasing Compounds From LOCTITE®
Natural Blue Cleaner & Degreaser
Fragrance-Free Natural Blue® Cleaner & Degreaser
ODC-Free Cleaner & Degreaser (Naphtha)
Hydro-Force Cleaner & Degreaser
Non-Chlorinated Parts Cleaner
Pro Strength Parts Cleaner
Varnish Remover
Battery Cleaner
Battery Protector & Sealant
Cold Parts Immersion Cleaner
Multi-Purpose Glass Cleaner
Paint Stripper
Plastic Cleaner
Radiator Cleaner