![[Product Image]](Lube.jpg)
Anti-seize compounds from Loctite.
Anti-seize compounds protect mated metal parts against friction, galling, and corrosion. Anti-seize also reduces wrench torque to facilitate assembly and disassembly of threaded connections. Loctite anti-seize compounds are stocked in a variety of formulations for your specific applications. Some of the more common anti-seize compounds are listed below.
C5-A Copper Base
Exclusive formula suspends copper and graphite in a high quality grease. Protects metal parts from rust, corrosion, galling and seizing at temperatures to 1800°F. Tested and certified to MIL-A-907.
Nickel Anti-Seize
Copper-free. Recommended for stainless steel and other metal fittings. For preventing corrosion, seizing and galling in harsh chemical environments and temperatures to 2400°F.
Heavy Duty Anti-Seize
Metal-free. Excellent lubricity. Provides outstanding lubrication to all metals including stainless steel, aluminum, and soft metals up to 2400°F. Meets requirements of USDA for incidental food contact.
Moly Paste
Very low friction. Lubricates press fits, protects during break-in and under high static loads up to 750°F. Allows maximum clamping from available torque. Meets requirements of USDA for incidental food contact.
Moly Dry Film
Solid film lubricant for sliding surfaces and slow-moving parts. Temperature resistant up to 750°F as a dry film lubricant, 2400°F as an anti-seize. Won't squeeze out, burn off or pick up dirt.
Food Grade Anti-Seize
Meets USDA code H2 standards for incidental food contact. Prevents seizure, galling and friction in stainless steel and other metal parts up to 900°F.
Graphite-50 Anti-Seize
Electrically conductive, non-metallic. (was MIL-T-5544). Temperature resistant to 900°F. Highly electrically conductive in metal-to-metal joints..
Moly-50 Anti-Seize
General-purpose thread lubricant tested to MIL-T-83483. Temperature resistant to 750°. Provides excellent lubricity.
Zinc Anti-Seize
Protects aluminum and ferrous surfaces from seizure and corrosion to 700°F. Tested to MIL-T-22361.
Silver Grade Anti-Seize
Graphite and metallic flake petroleum-based lubricant compound. Will not evaporate or harden in extreme cold or heat- assemblies up to 1600°F.
N-1000 High Purity Copper Anti-Seize
Certified pure. Copper based anti-seize suitable for critical, long-term stainless steel applications and high nickel alloy bolting. Recommended for protecting Class 2 and 3 power plant hardware. Temperature resistant to 1800°F.
N-5000 Nickel High Purity Anti-Seize
Nickel-based. Lubricates and protects Class 1,2 and 3 power plant hardware. Recommended for highly corrosive environments to 2400°F.
C-200 Sold Film Lubricant
Bake on solid film protection for engine parts, bearings and servo-mechanisms. Temperature resistant up to 750°F as a dry film lubricant, 2400°F as an anti-seize. Tested and certified to PWA-586.
Extreme Pressure Grease
Lubricates gears, bearings and slides up to 450°. NLGI #1 Rated. Withstands extremes of pressure, resists water washout. Maintains pumpability at low temperatures; will not take a hard set after cooling. Meets requirements of USDA for incidental food contact.
Food Grade Grease
Extreme pressure grease with temperature resistance tom 450°F NLGI #2 Rated. Protects after flushouts and steam cleaning. Meets requirements of USDA for incidental food contact.
Silicone Lubricant
Multi-purpose aerosol stops sticking, friction, squeaking and binding of moving parts. Non-gumming. Will not mar paint, rubber or plastic surfaces. Waterproofs and electrically insulates. Meets requirements of USDA for incidental food contact. Contains no ODCs.